Welcome to Harrison Machinehandel

  • +32 (0)11 755283
  • info@harrisonmachines.com
contact us
Other machines

Other machines (17)

TOS Horizontal Boring Machine with DROs
Type:WH80
Year:1971
Spindle diameter:80mm
Spindle taper:5 Morse
Maximum diameter of the boring spindle:450mm
Maximum depth of drilling:710mm
Spindle stroke:900:mm
Clamping table surface:1000x1000mm
Spindle speeds(21):14-1400rpm
Machine floor space 2400x4600mm
Machine weight 10,000 kg

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Monday, 18 October 2021 14:06

RASKIN Eccentric press
Type:R3
Year:1962
Capacity:30t
Table size:570x430mm
Through hole :Ø200 mm
Discharge:230 mm
Stroke adjustment:15-75mm
Dimensions-LWH:1600x890x2080mm
Weight:2200kg

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Monday, 18 October 2021 13:59

MAS Radial Drilling Machine
Type:VO50
Max. distance between spindle and guide:1600mm
Max. distance between spindle nose and base:1505mm
Vertical travel:875mm
Horizontal travel:1280mm
Spindle stroke:310mm
Spindle speed:2500rpm
Table 1000 x 750 x 500mm
Machine size:3100x1300x2800mm
Machine weight ca.:4550kg

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Monday, 18 October 2021 13:53

KÖLLMANN Plano Milling Machine
Type:E900
Year:1972
Working table area:3700x900mm
Max. table load:12500kg
Table travel:4300mm
Horizontal spindle travel:800mm
Horizontal spindle speed:1200rpm
Vertical spindle travel:1250mm
Vertical spindle speed:1200rpm
Vertical spindle tilt:45°
Machine weight:30t

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Friday, 15 October 2021 12:17

EURING Bending Machine
Type:CM2000
Roll diameter:138mm
Turning speed:9/18rpm
Engine power:1hp
Machine size-LWH:665x740x1400mm
Machine weight:170kg
Can work both horizontally and vertically
Two forming rolls
Cap flat steel:50x10mm
Cap tube:60x2mm

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Friday, 15 October 2021 12:01

ATLAS COPCO Compressor
Type:GA11FF
Year:2006
Max. working pressure:9,8bar
Free air delivery: 24,5l/s
Nominal shaft power: 11kW
Rotational shaft speed: 2940rpm
Weight:432kg

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vitall details!

 

Friday, 15 October 2021 11:50

MAS Radial Drilling Machine
Manufacturer: MAS
Type:VR6A
Year:1974
Radius:1750mm
Drilling capacity:60mm
Morse taper:MK5
Base/table dimensions:2850x1100mm
Max. distance round column-drillingspindle:440-2000mm
Max. drilling depth:380mm
Spindle speed:16-1400rpm
Spindle power:7,5kW
Machine weight:6400kg

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Tuesday, 01 June 2021 06:16
  •  Start 
  •  Prev 
  •  1  2 
  •  Next 
  •  End 
Page 1 of 2

Loading photos