LEADWELL Vertical Machining Centre
Type:V-50L
Year:2012
Control:FANUC Oi-MD
XYZ travel:1270x635x610mm
Table size:1420x610mm
Max. table load:1000kg
Spindle table distance:100-710mm
Spindle speed:8000rpm
Spindle Motor (kW):18.5kW
Number of controlled axes:3
Toolchanger: 24atc
With chip conveyor
Machine size-LWH:3840x2200x2720mm
Machine weight:7000kg
In excellent condition
Through spindle coolant

Very low working hours, as good as new
Run time:3710hr, done only 1hr a day of work

Video available at:
https://youtu.be/7ZBGVilGiwk

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

LEADWELL Vertical Machining Centre with 4th axis
Type:V-30I
Year:2007
Control:FANUC OiMC
4th axis
XY travel:760x410mm
Z travel:510+110mm
Toolchanger:20atc
Spindle speed:10000rpm
Table size:890x500mm
Max. table load:300kg
Machine weight:4500kg
With chip conveyor
In excellent condition
Through spindle coolant

Very low working hours
Run time:6568hr, done only 1hr a day of work

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

LEADWELL Vertical Machining Centre
Type:V-22i
Year:2015
Control:FANUC Oi-MD
XYZ travel:510x420x510mm
Distance from table top to spindle end:100-610mm
Distance from column front to spindle center:460mm
Table size:600x400mm
Max. table load:250kg
XYZ rapid traverse:48m/min
Toolchanger:24atc
Max. spindle speed:8000rpm
Machine size-LWH:2310x3050x2490mm
Machine weight:3300kg
With chip conveyor
In excellent condition
Through spindle coolant

Very low working hours, as good as new
Run time:1512hr, less than 1hr a day of work

Video available at:
https://youtu.be/7zha7dnkKFg

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

LEADWELL 5-axis CNC Vertical Machining Centre
Type:MV-40
Year:2007
Control:FANUC 18i-MB
With RENISHAW
XYZ travel:1020x510x510mm
Table size:1200x510mm
Max. spindle speed:8000rpm
Machine size-LWH:3030x2535x2585mm
Machine weight:5800kg
In excellent condition
Through spindle coolant

Very low working hours, as good as new
Run time:3272hr, less than 1hr a day of work

Videos available at:
https://youtu.be/d7oueDYyufM
https://youtu.be/D5JUxS9YyNo
https://youtu.be/KzY0UyMK5AM
https://youtu.be/tjp7dE4ERxE
https://youtu.be/7ULVfvLL0bk

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

EUMACH CNC Vertical Machining Center
Type:MC-800 P
Year:1996
Control: HEIDENHAIN 360
XYZ travel:800x475x580mm
Toolchanger:24atc
Table size:1200x635mm
Max. load on table:500kg
Spindle speed:60-6000rpm
Distance from spindle center to the machine column:520mm
Distance from spindle nose to table:140-650 mm
In 2010 the machine had a total bed and spindle overhaul
After that, the machine is only used for 5 products that occur a few times a year

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

LIECHTI 5-axis CNC Vertical Machining Centre
Type: Turbomill 1200
Year:1997
Control:SIEMENS 840D SL
Spindle taper:HSK-A63
Toolchanger: 32atc
Max.spindle speed:24000rpm
Travel XYZ:1400x500x500mm
Travel A-axis: +45 to -90 degrees
Travel B-axis: +50 to -50 degrees
Working hours:6600hrs

Video available:
https://youtu.be/bB7oVnafH3U

Machine is in excellent condition and can be viewed under power in Belgium

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!