Welcome to Harrison Machinehandel

  • +32 (0)11 755283
  • info@harrisonmachines.com
contact us
Sheetmetal machines

Sheetmetal machines (12)

SERTOM 3 roll plate bender
Year:1998
Type:3000x8
Max. capacity plate:30mm
Machine size-LWH:5000x1300x1300mm

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Thursday, 26 September 2019 10:22

HACO Hydraulic Pressbrake RETROFITTED
Type:PPES 20/60
Year:1991
Control:M91091
Capacity:2000mmx60t
Machine size-LWH:2700x1300x2500mm
Books included

 

Videos available

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Tuesday, 17 September 2019 09:21

HACO Hydraulic Pressbrake RETROFITTED
Type:PPES 30/135
Year:1989
Capacity:3000mmx135t
Machine size-LWH:3500x1500x2500mm
Books included

 

Video available

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Tuesday, 17 September 2019 08:59

SAFAN electrical press brake
Type:SMK40-2050
Year:1996
Capacity:2050mmx40t
Stroke length:115mm
Drop speed:90mm/sec
Press speed:20mm/sec
Return speed:90mm/sec
Nominal power:9kW
Machines size-LWH:3000x1900x2600mm
Machine weight:4250kg
Books included

 

Video available

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Tuesday, 17 September 2019 08:23

ESAB Plasma cutting machine
Type:UXD-P1100
Year:2005
XY travel:2500x1600mm
Track height:910mm
Track length:3000mm
Cutting length:1500mm
Max. cutting thickness:150mm
Height of cutting table:700mm
Cutting width:1100mm
Machine size-LWH:3000x2000x2200mm
Max. machine speed:12000mm/min
Machine weight:1000kg

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Thursday, 27 June 2019 12:28

AMADA CNC pressbrake
Type:ITP 100-30
Year:1988
Capacity:3000mmx100T
Distance between side housings:2600mm
Throat depth:400mm
Adjustable ram stroke:100mm
Table to ram distance at high dead point:370mm
Weight:6500kg

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Thursday, 27 June 2019 11:27

BAUER Bandsaw
Type:SA 430 ZA
Year:2008
Bundle:250x430mm
Blade size:5200x41x1.3mm
Capacity 90° round:430mm
Capacity 90° flat:430x430mm
Drive motor:4kW
Max. workpiece weight:1600kg
Machine size-LWH:2200x2600x2300mm

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Friday, 15 March 2019 16:41

VEENSTRA Tube End former
Type:REDUMAT26E
Year:1983
Max. pressure:160bar
Max. press force:6,5t
Max. presscylinder stroke:75mm
Max. clamp stroke:37mm

Used to reduce diameter at tube end

 

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Wednesday, 13 February 2019 12:53

CASER Radial Drill
Type:F35
Table size:750x550mm
Maximum distance spindle to column:1200mm
Column diameter:305mm
Vertical travel of spindle:305mm
Spindle taper:#4 MT
Spindle speed(12):64-2100
Approx. weight:2500kg

 

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Thursday, 24 January 2019 16:39

CASER Radial Drill
Type:F35A
Year:
Drilling in the full:35mm
Drilling with pilot hole(D/2):60mm
Thread:35mm
Max. radius of drilling:1125mm
Max. distance between pin and base:1350mm
Bore:85mm
Column diameter:250mm
Spindle motor:3,5-3hp
Rotational speed(14):47-2120rpm
Machine size-H:2155x1800x760mm
Weight:2100kg

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Friday, 04 January 2019 13:42

FAMAR hydraulic bending rolls
4 rolls
Type:Q415 25/4
Year:1998
Working Length:2550mm
Max Rolling Thickness:5mm
Max Pinching Thickness:4mm
Top Rolls Diameter:150mm
Bottom Rolls Diameter:150mm
Main motor:4kW
Double hydraulic pinch

 

This machine can be seen running in a local Belgian factory

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Thursday, 15 November 2018 11:39

BPR Profile bending rolls

Type:C353HV
Shaft diameters:35mm
Roll diameters:140mm
Drive motor:1.5hp
Driving rolls:3
Forming roll adjustment:Hydraulic
Working height:813mm
Speed:11.5rpm
Weight:350kg

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Wednesday, 07 November 2018 21:30

Loading photos