Welcome to Harrison Machinehandel

  • +32 (0)11 755283
  • info@harrisonmachines.com
contact us
Jonathan

Jonathan

LEADWELL Vertical Machining Centre

LEADWELL Vertical Machining Centre
Type:V-50L
Year:2012
Control:FANUC Oi-MD
XYZ travel:1270x635x610mm
Table size:1420x610mm
Max. table load:1000kg
Spindle table distance:100-710mm
Spindle speed:8000rpm
Spindle Motor (kW):18.5kW
Number of controlled axes:3
Toolchanger: 24atc
With chip conveyor
Machine size-LWH:3840x2200x2720mm
Machine weight:7000kg
In excellent condition
Through spindle coolant

 

Very low working hours, as good as new
Run time:3710hr, done only 1hr a day of work

Video available at:
https://youtu.be/7ZBGVilGiwk

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

KARSTENS Cylindrical Grinding machine

KARSTENS Cylindrical Grinding machine
Type:HG310A
Year:2006
Control:SIEMENS 840D
5-axes
XZ traverse:500x1700mm
Centre height:181mm
Grinding diameter:5-360mm
Max. grinding length:1000mm
Workpiece weight between centres:250kg
Grinding depth:max. 120mm
Plunge grinding length:max. 100mm
Feed speed:0,01-15.000mm/min
Machine weight:15000kg
Machine size-LWH:3600x2400x2680mm
Tilt +/-:250°

 

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

HYUNDAI Forklift

HYUNDAI Forklift
Type:15BTR-9
Year:2014
Drive:Electric
Travel speed unloaded:13 km/h
Load capacity:1500 kg
Lip length:1200mm
Fork carriage width:950mm
Turning radius:1480mm
Lift speed, loaded / unloaded:290/530mm/s
Lowering speed, loaded / unloaded:500/450mm/s
Mast / fork carriage tilt forward / backward:5/6°
Lowered mast height (standard):1970mm
Extended mast height (standard):4024mm
Free lift:35mm
Lift height:3025mm
Load centre distance:500mm
Load distance, centre of drive axle to forks:330mm
Wheelbase:1200mm
Axle loading, loaded front / rear:3775/565kg
Axle loading, unloaded front / rear:1254/1586kg
Tires:SuperElastic
Forklift size-LWH:2710x990x2100mm

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

DECKEL MAHO 5-axis Vertical Machining Centre

DECKEL MAHO 5-axis Vertical Machining Centre
Type:DMU 80T
Year:2003
Control:HEIDENHAIN iTNC530
5-axis simultaneous
XYZ travel:880x630x630mm
Max. spindle rpm:12000rpm
NC-Swivel-Milling-Head
NC-Rotary-Table integrated in fixed Working-Table:1200x700mm
NC-rotary table - speed - max.:15U/min
Workpiece length:315mm
Spindle taper SK 40
Toolchanger:atc 32 (2 x 16) Pos
Machine size-LWH:4600x2400x2500mm
Machine weight:9900kg
Power on time:34947hr

Videos available at:
https://youtu.be/nAYvrfvp0V8
https://youtu.be/2nItX39zce0
https://youtu.be/8xNoaOrRWtU
https://youtu.be/lmplq7ZfokE
https://youtu.be/sClaYMzBGro
https://youtu.be/NOOEBJ9IANQ

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

JPL Hydraulic Press

JPL Hydraulic Press
Type:C250-100kN
Year:1998
Maximum pressing force:100kN (10 tons)
Downward speed:28mm/sec
Overhang:260mm
Maximum stroke cylinder:450mm
Maximum workpiece height:425mm
Dimensions pressing table:600x290mm
Pressing table working height:890mm
Weight:650kg

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

EISELE Cold circular saw

EISELE Cold circular saw
Type:VMS-II-S
Year:1986
Saw diameter:315 mm
Speed:34/68rpm
Power needed/motorpower:3,6 kW
Length L -- R:1300 mm
Depth Fw -- Bw:900 mm
Height:1850 mm
Weight:590 kg

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

TENDOTOOLS Panel Saw

TENDOTOOLS Panel Saw
Type:TT45/3200S
Cap. of cutting 3100 mm
Blade 300 mm
Depth of cutting 90°: 80 mm
Depth of cutting 45°: 55 mm
Axle saw Ø: 30 mm
Angle adjustment 0° - 45°
Chisel 120 mm
Speed chisel:8000 t/min
Axle chisel: 20 mm
Width of cutting:1250mm

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

IMET Manual Circular Saw

IMET Manual Circular Saw
Type:VELOX 350
Area angular cut:-45° / 90° / +45°
Cutting capacity at 90° round / square / rectangular:120 / 105 / 200x80mm
Blade dimensions:350mm
Blade Motor Power:1.5/1.8kW
Blade speed:1800/3600rpm
Dimensions (LxWxH ):880x610x990mm
Height of the work-table:930mm
Weight:163kg
Manual circular saw to cut aluminium and light metals. Mitre cutting from 0° to 45° left and right. The head bends 45° on the vertical axis to allow inclined cuts.
2-speed motor allows to employ HSS blades for brass and copper profiles.
Suited to cut aluminium, light metal profiles and solids with high accuracy.
In addition to the standard horizontal inclination from -45 ° to +45° it also has the possibility to tilt the head vertically to 45 ° left.

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

SHENYANG CNC Turning Centre

SHENYANG CNC Turning Centre
Type:CKS6125
Year:2005
Control:FANUC SERIES Oi
Max. swing over bed:460mm
Max. turning length:460mm
Max. turning diameter:250mm
XZ travel:150x520mm
Machine size-LWH:2790x1570x1750mm
Machine weight:4600kg
With chip conveyor
With tailstock
In excellent condition

Very low working hours, as good as new
Run time:1147hr, has been used 1hr a week

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

LEADWELL Vertical Machining Centre with 4th axis

LEADWELL Vertical Machining Centre with 4th axis
Type:V-30I
Year:2007
Control:FANUC OiMC
4th axis
XY travel:760x410mm
Z travel:510+110mm
Toolchanger:20atc
Spindle speed:10000rpm
Table size:890x500mm
Max. table load:300kg
Machine weight:4500kg
With chip conveyor
In excellent condition
Through spindle coolant

Very low working hours
Run time:6568hr, done only 1hr a day of work

 

Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

  •  Start 
  •  Prev 
  •  1  2  3  4  5  6 
  •  Next 
  •  End 
Page 1 of 6

Loading photos